How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

How do you clean electric eye and change nozzle on oil

Customer Question

How do you clean electric eye and change nozzle on oil burner
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.
Hello,
did you run out, get fuel, and now it will not start?
Customer: replied 1 year ago.
Customer: replied 1 year ago.
It will fire for very short time and then cut out.
Expert:  BillyHvac replied 1 year ago.
Thank you,
have you primed the pump? And if not would you like to know how?
Customer: replied 1 year ago.
It is on a continuous circle fuel system. Fuel at Tiger Loop (fair amount of bubbles-air)
Expert:  BillyHvac replied 1 year ago.
Thank you,
From the primary control (with reset button) runs 2 yellow wires.
Do you see these 2 wires?

Related HVAC Questions