How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22100
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have a new gree mini split with a H5 code protection,

Customer Question

I have a new gree mini split with a H5 code for IPM protection, what causes this?
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
It's a model I picked up at home depot, 9k but mini split .
Customer: replied 1 year ago.
Model RIO09HP115V1A
Expert:  BillyHvac replied 1 year ago.
hello,
this means the outdoor coil is dirty, fan is not working.
Is the outdoor condenser fan running? Is the coil plugged?
use reply
Customer: replied 1 year ago.
Fans work coils clean, rums 40 min, flashes and code H5, blows warm,
Customer: replied 1 year ago.
IPM Module protection
Customer: replied 1 year ago.
Is that a control board in the evap section not cooling?
Expert:  BillyHvac replied 1 year ago.
It has to do with the outdoor unit not cooling the refrigerant enough.
Direct sun for long periods could raise pressure, too much freon...anything that cause extra heat/pressure to build.
Customer: replied 1 year ago.
where is the ipm module located
Expert:  BillyHvac replied 1 year ago.
in the outdoor condensing unit

Related HVAC Questions