How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22468
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have a Worcester greenstar 25si boiler. I have

Customer Question

I have a Worcester greenstar 25si boiler. I have just changed the diverter valve and the problem with the hot water has now been resolved. Unfortunately the CH does not work. Please can you help
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
The reason why I changed the diverter valve was that when I turned the hot water tap on, the flow pipe of the CH got hot. I was advised to close the CH flow pipe off and see if I got hot water and if so the diverter was at fault.
Expert:  BillyHvac replied 1 year ago.
Hello,
has the ch circuit been reopened?
Was new valve a direct changeout?
Use reply
Customer: replied 1 year ago.
Yes, i have opened the valves and i changed the motorised section of the diverter and also the rubber paddle