How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I HAVE AN OLD UNIT TRYING TO FIGURE OUT WHAT COMPRESSOR I WOULD

Customer Question

I HAVE AN OLD UNIT TRYING TO FIGURE OUT WHAT COMPRESSOR I WOULD NEED TO REPLACE
ROOF TOP PACKAGE UNIT
130A00001 SER ?
452001F040001 MOD?
IT HAS 2 COMPRESSORS WRITTEN ON UNIT SAYS EACH COMPRESSOR TAKES 8 LBS R22
UNIT TAKE 60 AMP 208 VOLT 3 PHASE
30 AMP FUSES FOR EACH COMPRESSOR
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.
Hello. My name is ***** ***** I'll do my best to help. Let's get started and see what we can do.Not finding anything with those numbers. Can you upload a photo of unit and the rating plate?
Customer: replied 1 year ago.
THERE IS NO RATING PLATE JUST THE NUMBERS I FOUND IN MARKER WRITTEN ON UNIT
Expert:  Phil replied 1 year ago.
The compressors are most likely Copeland or Techumseh...they have metal plates spot welded on their tops or sides. with raised lettering, the entire thing painted black... the plates are not obvious. If you find no such plates those are not US made compressors, send me a photo of each one, use the paper clip icon above for that. If you can find them, type all the numbers and names you find on them here. We can go from there.