How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22092
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have a Bryant Ac that I installed a new thermostat on and

Customer Question

I have a Bryant Ac that I installed a new thermostat on and now it is showing a code 24, short in the 24 v wiring. So I put in all new wiring same thing. Is there a need to reset the system
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.
Hello,
there is a small 3 amp fuse on the cirrcuit board next to the blinking light...replace this fuse and you will be fine.
This happens a lot when changing stat with furnace power still on.
Billy