How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I got a message on my Honeywell ac thermostat that the batteries

Customer Question

I got a message on my Honeywell ac thermostat that the batteries were low. Then the LCD lights went off. I replaced the batteries but now no LED lights, no A/C. What should I do now?
Submitted: 1 year ago.
Category: HVAC
Expert:  gotoman for ac replied 1 year ago.
Russ here. Welcome. I am here to help. Please do not rate until you are satisfied with answer. Always available for follow up questions.
Make sure batteries are installed properly first. Next pull front off thermostat and take a small wire and place between R and G to see if fan comes on. It may a take a few seconds because of time delay in fan. If you have a voltmeter that will help. Voltage set on AC read between R and any terminal that has wires for 24 volts and let me know. If fan does not run let me know. Is this a gas furnace or heat pump. Russ