How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gotoman for ac Your Own Question
gotoman for ac
gotoman for ac, HVAC Technician
Category: HVAC
Satisfied Customers: 4999
Experience:  51 years of experience install design and repair of all makes and models of AC
Type Your HVAC Question Here...
gotoman for ac is online now
A new question is answered every 9 seconds

Good morning! My unit is electrical heat pump. I am in the

This answer was rated:

Good morning!
My unit is electrical heat pump. I am in the process of installing a new blower motor relay (90380). The old relay (134-10103-333A). The place i bought the relay from said to use the 90380. The old switch was sticking on. Can I just match the wire/#'s to the new relay?
Russ here. Let me check wiring be right back. Russ
Customer: replied 2 years ago.

ok. Thank you

Pulled both relay diagrams and the wiring matches. Russ
Customer: replied 2 years ago.

ok. So just just move wires from one relay to the other matching up the #'s. Thank you!

That is correct. Russ
gotoman for ac and other HVAC Specialists are ready to help you

Related HVAC Questions