How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22356
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

lennox pulse g14 wont fire just clicks

This answer was rated:

lennox pulse g14 wont fire just clicks

Billy :

Hello,

Billy :

my name is Billy

Billy :

Can you tell me if your exhaust motor kicks on that sends exhaust out the plastic vent pipe?

Billy :

I will switch from chat in case you are having difficulty.

Can you respond to this message?

Billy

Customer: replied 3 years ago.

yes the exhaust motor kicks on, its the first thing to happen. then the gas valve clicks there is a humming noise for about 10 seconds. then another click. sometimes there is a water flowing noise

Thank you.

This is a condensing furnace and can get plugged with condensate over time.

I take a shop vacuum and remove a drain hose where it exits furnace...then apply suction to the drain. We want to get as much out as we can.

Many times the unit is filled with "thick water" which impedes the drain.

Can you do this?

Customer: replied 3 years ago.

yes i can

Would you like a manual for the unit?

Customer: replied 3 years ago.

ok

There is also a troubleshooting flow chart in the back. This is a handy manual for that furnace.

Lennox G14 Pulse Furnace Manual

If you need anything at all please let me know.

Billy

BillyHvac and 2 other HVAC Specialists are ready to help you

Related HVAC Questions