How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Drcool Your Own Question
Drcool, HVAC Technician
Category: HVAC
Satisfied Customers: 2086
Experience:  i have been an A/C tech for the past 12 Years. working on window types, split type, and package
Type Your HVAC Question Here...
Drcool is online now
A new question is answered every 9 seconds

system pressures for hi and low on Fujitsu model AOT30RMAL

This answer was rated:

system pressures for hi and low on Fujitsu model AOT30RMAL split cooling and heating system.

Drcool :

Hello, Even with your model number, I can not find what type of refrigerant your unit is using. If you can look at the name plate or on a sticker on the outdoor unit, It might indicate there what type of refrigerant it is using.

Drcool :

If it says there R-22. then on cooling mode, low pressure would be around 60 psi and hi pressure would be around 250 psi.

Drcool :

If it says R-410. then it could be an inverter type and depending on the capacity of the motor while cooling, it would vary because the speed of the compressor varies as well. It should be between 90 psi-140 psi on low pressure and 260 psi-300 psi on hi pressure.

Drcool and 2 other HVAC Specialists are ready to help you