I have a programmable thermostat that is set for A/C. There is a message in the middle that says "In Recovery" and a flashing message to the right that says "Cool On".The temperature is set to 72 degrees, and currently reading 74 indoors. I have verified that the outdoor fan is running. What does this mean?
Type of HVAC: Thermostat Control
replaced the battery. Switched control from auto to on. Siwtched cooling off, then back on.
Sorry chat mode not working on my end
It means that the thermostat turn on cooling most likely thru adaptive learning and its trying to bring house down to setpoint which is 72 according to you, depending on size of house and current heat load it may not recover too quickly
Sorry but I don't understand. What is adaptive learning? Why doesn't the thermostat just start cooling whenever the temp is higher than the setpoint?
You can go into programming and turn adaptive learning off which would make it run as normal thermostatAdaptive thermostat try to adjust ahead of time to be sure its at temperature you set in program is achievedRick Mather41117.925734294
35 years experience, HVAC