Recent Feedback
My trane xe90 is not lighting. The light blinks 4 times. I have already jumped the high limit switch wires and the code remains. I did the shut off for 30 seconds, turn on, shut off and back on but it goes right back to the high limit open code. The furnace will not light at all. All fans are operating just no flame.
Hi. I'm Joe and I will be glad to help you out.
Have you tried resetting the flame rollout switch?
I dont know what that is
okay, I've seen that. how do i reset it
press the red button in the center in
tried that, it feels loose\
Just as a test, never leave it like this, have you tried to jump out the wires going to it?
tried that
What other limits did you bypass?
one just past the firebox, the only other one that looks like it can be jumped
There should be a secondary limit mounted on the blower housing. normally near the back, it should go inline from the other limits, so you should be able to trace the wires to find it.
I see that one
Did you bypass it too?
doing that now
no difference
Okay. I have to step out for a while, so I will opt out so that another expert can assist you.
Relist: Other.could not answer the question and opted out
Relist: Incomplete answer.
Hello there! I'm Norman but you can call me Norm. Let's see what I can do to get you some answers today. I'm ready to get started whenever you are.Do you have the full model number for the furnace?