How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick, HVAC Supervisor
Category: HVAC
Satisfied Customers: 20929
Experience:  40+ yrs. experience as a licensed oil & gas technician.
Type Your HVAC Question Here...
Rick is online now
A new question is answered every 9 seconds

The diagnostic light on my beckett by honeywell oil furnace

Customer Question

The diagnostic light on my beckett by honeywell oil furnace is indicating that there is no flame. how do I relight it?
Submitted: 5 years ago.
Category: HVAC
Expert:  Rick replied 5 years ago.
Welcome to Just Answer,

You push the reset button on the burner control (probably the one that's blinking)
Customer: replied 5 years ago.
unfortunately there was no blinking light. I actually solved the problem my self. It was as simple as placing a call for heat on the thermostat. Since there is no pilot to light just coils that need to be energized. Thanks for trying though.
Expert:  Rick replied 5 years ago.
You said the diagnostic light indicated a flame failure. I gave you the reset procedure. If your burner control indicates a flame failure simply turning up the thermostat would not solve the issue.