How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22386
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

i have forgotten how to unlock my touchscreen honeywell thermostat.

Resolved Question:

i have forgotten how to unlock my touchscreen honeywell thermostat. can you help/
Submitted: 5 years ago.
Category: HVAC
Expert:  BillyHvac replied 5 years ago.

can you tell me if your thermostat ressembles this one?

 

http://www51.honeywell.com/pacific/common/documents/TH8000_VisionPRO_Use.pdf

 

 

Customer: replied 5 years ago.

it is that one

 

Expert:  BillyHvac replied 5 years ago.

Start at page 34....then scroll to step 13.

 

If you have issues let me know.

 

Billy

BillyHvac and other HVAC Specialists are ready to help you
Customer: replied 5 years ago.
I don't have a book. i have to hold down one or two buttons to unlock screen
Expert:  BillyHvac replied 5 years ago.

That link is the book

 

see here - http://www51.honeywell.com/pacific/common/documents/TH8000_VisionPRO_Use.pdf

 

do you see the system key on the bottom of the touch screen?

 

 

Customer: replied 5 years ago.
there is a system key on the left side\
Expert:  BillyHvac replied 5 years ago.

correct ...press the system key...

 

then 5 blank squares will appear across the bottom between the done button and cancel button

 

press the center blank square for 5 seconds..then use the up arrow until 0670 appears.

 

tell me when you have that up..

Customer: replied 5 years ago.

schedule/hold/clock/screen/blank is on the bottom

 

Expert:  BillyHvac replied 5 years ago.

correct, but when you hold the system button down the sched hold clock screen should go blank and just be empty squares

Customer: replied 5 years ago.

i have it to the 0120 and 20 screen. now what to unlock?

so that i can reprogramme

Expert:  BillyHvac replied 5 years ago.

 

now in center screen is an up and down button button and also an up and down at right side.

 

Use the center up button and scroll to 0670

 

then use right down button to show 0