How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gotoman for ac Your Own Question
gotoman for ac
gotoman for ac, HVAC Technician
Category: HVAC
Satisfied Customers: 5138
Experience:  51 years of experience install design and repair of all makes and models of AC
19613070
Type Your HVAC Question Here...
gotoman for ac is online now
A new question is answered every 9 seconds

B3Bm-042k-B air handler. Unit fails to shut off fan when not

Customer Question

B3Bm-042k-B air handler. Unit fails to shut off fan when not heating in 'auto' mode. I have a heat pump. I am hoping there is a continuous-fan circuit on the board that I can disconnect a wire from - not sure though. Have not opened unit to see board and do not have a wiring diagram.

Thanks!
John
Submitted: 5 years ago.
Category: HVAC
Expert:  airheatman replied 5 years ago.

airheatman :

Let me see if I can find a schematic

airheatman :

Sorry I dont have the manual for that unit

Expert:  gotoman for ac replied 5 years ago.
You have Nordyne product. Go www.nordyne.com/Literature/710416a.pdf for schematic. Sounds like a contactor or fan relay. Russ
Customer: replied 5 years ago.

Hi Russ,

 

Contactor or Fan relay - is either atttached to the main board? If so do I need to replace the board or can these parts be fixed without replacing the main board?

 

How big a job is replacing either one?

 

Thank you!

John

Related HVAC Questions