How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask M Oglesby Your Own Question
M Oglesby
M Oglesby, HVAC Technician
Category: HVAC
Satisfied Customers: 2038
Experience:  Universally Certified HVACR Technician
27079509
Type Your HVAC Question Here...
M Oglesby is online now
A new question is answered every 9 seconds

Bryan Plus 90 furnace needs limit switch replaced. How much

This answer was rated:

Bryan Plus 90 furnace needs limit switch replaced. How much is the part and how long does it take to replace, please.

What is the best, XXXXX XXXXX model of Bryant furnace?

M Oglesby :

Hello I am here to assist you.

M Oglesby :

There are two kinds of limit switches on your furnace.

M Oglesby :

The first is the Main Limit Switch. It cost about $40

M Oglesby :

The second is a Manual Reset Rollout Limit Switch. It cost about $25

M Oglesby :

It takes 10 min. to change either one of them.

M Oglesby :

I have no information on which Bryant Furnace is the most reliable.

Customer:

10 min?

M Oglesby :

Yes 10 min.

M Oglesby :

Please hit ACCEPT if you are satisfied with this answer.

Customer:

how complex is repair, please

M Oglesby :

Very easy. Not complex at all.

M Oglesby :

Just remove 2 screws and pull the limit switch out and put the new one in and replace the two screws.

M Oglesby :

Please hit ACCEPT if you are satisfied with this answer. Bonuses and positive feedback are very much appreciated!

Customer:

I have called authorized Bryant distributor, who wants to charge $200 flat fee for the part and to replace

M Oglesby :

That is typically what any technician will charge to replace it.

M Oglesby :

That price is competitive unfortunately.

Customer:

You just said 10 min

M Oglesby :

I know.

Customer:

And Bryant said hour and half

M Oglesby :

They exagerated.

Customer:

One more question - if I press 'accept' and my credit card is charged

Customer:

what is the charge going to be shown as - what name/vendor?

M Oglesby :

$9 Just Answer

Customer:

Do you have any advice as to how to bargain for the labor of 1 1/2 hours for actual 10 min work?

M Oglesby :

Also it does take a little time to verify that the Limit Switch is the problem.

M Oglesby :

Offer him $150

M Oglesby :

He may go for it.

Customer:

I have paid $98 to know what is wrong

Customer:

just to come in and check the furnace was $98

M Oglesby :

Did the technician show you where the limit is located?

Customer:

yes - he did

M Oglesby :

Why don't you replace it yourself?

Customer:

i would rather not replace on my own - for safety

M Oglesby :

Save your self $150

Customer:

Hello?

M Oglesby :

Hello

M Oglesby :

You can get the limit switch here at www.AmericanHVACparts.com

M Oglesby :

Just have model number and serial number of furnace ready when ordering.

Customer:

Can we ask any HVAC technician to replace it then?

M Oglesby :

Sure

Customer:

Many thanks - I appreciate your help.

M Oglesby :

You are welcome.

M Oglesby :

Bonuses are appreciated!

M Oglesby and other HVAC Specialists are ready to help you