How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Douglas Your Own Question
Douglas
Douglas, HVAC Technician
Category: HVAC
Satisfied Customers: 3089
Experience:  Manufacture Rep for Major Brand, Technical Trainer, NATE
27672032
Type Your HVAC Question Here...
Douglas is online now
A new question is answered every 9 seconds

I have a Honeywell CT2700 programmable Thermostat [11 years

Resolved Question:

I have a Honeywell CT2700 programmable Thermostat [11 years old] I live in a two bedroom apt 1260 sq ft. Thermostat set at 77* [winter] The heating cycle is very disturbing. Blower starts and runs for 3-4 minutes then off for 4-5 back on again . on and off on and off. Is the thermostat defective? On the wrong wall? heating cycle set wrong?
Submitted: 6 years ago.
Category: HVAC
Expert:  Douglas replied 6 years ago.
Hi, I'm Douglas and I am here to help you resolve problems with your heating and cooling equipment.

You can try to change the cycle rates in the thermostat.

1. Put the selector switch to off.
2. Adjust the thermostat down to 52 degrees
3. As soon as it shows the room temperature (about 5 seconds) press and hold both up and down simoultaniously for about 3 seconds and release to get into the set up mode.
4. Press the set button within 5 seconds to get to the cycle rate (CPH)
5 using the up or down arrow change the cycle rate to 3
6. Press Set to scroll through to END and then put the switch back to heat mode.

This will lower the number of cycles per hour giving you longer runs and longer off cycles.
Customer: replied 6 years ago.

Not easy, but I will try this suggestion!

Expert:  Douglas replied 6 years ago.
Easier than moving the thermostat, is it not?

Do you want a hard copy of these instructions for your records?

http://www.gogeisel.com/geiselonline/support/Honeywell/CT2700.pdf

Its starts on the bottom of page 6 under customizing your thermostat and continues on page 7.

The only other recomendation I have is to make sure the hole in the wall behind the thermostat is sealed up.

If this has been helpful, please click accept. Thanks
Douglas and other HVAC Specialists are ready to help you