Recent Feedback
I have a package hvac made by Armstrong. The circulating fan is running all the time even after the compressor has been off for more than 90 seconds. The fan continues to run when I place the thermostat switch is off position. It has a heatcraft model FTC8-EC03 control unit that appears to have been hot because some of the wires have melted insulation. How can I check this unit to make sure it is the problem before I replace it?
Already Tried: I have tried to cut unit off at thermostat but that does not stop the fan. The fan stops when I open breaker but starts again when I close breaker.
remove the G thermostat wire at the unit. If fan continues the fan relay is bad
Experience: Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics