How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 21994
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Old Fraser Johnston A/C. The capacitors test good and the relay

Customer Question

Old Fraser Johnston A/C. The capacitors test good and the relay clicks in, but the compressor or fan won't run. What else can I check
Submitted: 6 years ago.
Category: HVAC
Expert:  BillyHvac replied 6 years ago.
Chat Conversation Started
Billy :

If the contactor pulls shut and the capacitors are good, then you need to check the contactor points and make sure the 240v is present...actually you need to ensure you have 2 legs of 120 that = 240v. One blown fuse will still show 120v to ground on all test points...but when measured leg to leg do not have 240

Related HVAC Questions