How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, HVAC Supervisor
Category: HVAC
Satisfied Customers: 19522
Experience:  40+ yrs. experience as a licensed oil & gas technician.
94766
Type Your HVAC Question Here...
Rick is online now
A new question is answered every 9 seconds

Older Burnham gas boiler for hot water heat system, the VIZ

Resolved Question:

Older Burnham gas boiler for hot water heat system, the VIZ logic card, runs through all the led indicators, Pilot lights, however, the main gas valve relay does not light, and after 10 seconds the pilot goes out, without the boiler lighting.
Submitted: 6 years ago.
Category: HVAC
Expert:  Rick replied 6 years ago.
Hi

You probably have a faulty pilot flame sensor or a fault in the pilot proving circuit. About the only thing you might try before calling in a tech is to check the electrical connections to the pilot electrode and carefully clean off any carbon that has built up on the electrode.
Rick and other HVAC Specialists are ready to help you