How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 21995
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have an olf bryant gas furnace i replaced the 3 Wire Pilot

Resolved Question:

I have an olf bryant gas furnace i replaced the 3 Wire Pilot Burner Part #LH 680 005 and the gas valve but it still clicks on and off as it cannot see the flame
Submitted: 7 years ago.
Category: HVAC
Expert:  BillyHvac replied 7 years ago.
I think I would look at something else in the system. That pilot only sends a signal by heat. There is a warp switch in the side of the pilot that when hot from the pilot warps and makes contact thus turning the valve on. I think you may have to look at more of a power problem in the 24 volt system. I would start by jumping out the thermostat
BillyHvac and other HVAC Specialists are ready to help you

Related HVAC Questions