how do I remove the top cover on my Trane XL 1200
Package unit or heat pump unit ?
It is not a heat pump
OK, I'm assuming it is a packaged unit then.
Basically you take out all the screws that you can see, Trane uses a lot of screws.
I will leave this open to see if another expert can get you a more detailed answer.
Im trying to clean the outside condenseing unit and cant figure out how to take off the top cover. I can see how to remove the sides but not the top, please advise. Thanks.
There is a plastic cover on top that is held on with clips at each corner . Pry out slightly at each corner with a screw driver and the top lifts off.