How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, Honda Mechanic
Category: Honda
Satisfied Customers: 3432
Experience:  13+ years with Honda,ase certified over 25 years
13523613
Type Your Honda Question Here...
Steve is online now
A new question is answered every 9 seconds

On a 2005 honda pilot the drive dash lite flashes all the

Customer Question

On a 2005 honda pilot the drive dash lite flashes all the time and the scanner code po 970 says pressure control solenoid C control circuit low .Where would this be located?
JA: Have you checked the fuses? The dashboard bulbs?
Customer: Wondered where fuse woulb be for this?
JA: What is the make/model of your car?
Customer: 2005 honda pilot
JA: Are you fixing your Pilot yourself? What have you tried so far?
Customer: It is my sons just trying to find the problem
JA: Anything else you want the mechanic to know before I connect you?
Customer: Just where to find fuse or solenoid?
Submitted: 1 month ago.
Category: Honda
Expert:  Steve replied 1 month ago.

there would be no one fuse controlling this solenoid. It gets its power straight from the engine computer.This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission.

The solenoid is on the front of the transmission and has a 2 wire connector going to it. It is a single solenoid. It will have a green/red and black wire in the connector. they do not list a specific ohm reading for the solenoid but it has to have some resistance to keep the code from setting.