How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HondaPlatinum Your Own Question
HondaPlatinum
HondaPlatinum, A Technician
Category: Honda
Satisfied Customers: 11332
Experience:  13 year honda platinum level
3827149
Type Your Honda Question Here...
HondaPlatinum is online now
A new question is answered every 9 seconds

Honda I-vtec on a 2005 odyssey touring. p2467. overhauled

Customer Question

Honda I-vtec on a 2005 odyssey touring. p2467. overhauled engine complete. changed oil pressure switch, swaped entire valve assy, oil press 10 psi at idle. need explanation code sets at idle only. have no source on what volts I need at pressure sensor. I have what I think is v ref 5v, sensor gnd good, feed back sig 0.6v. runs fine until code sets, then lights for check engine and vsc all come on runs rough and both fans come on. Honda oil and filter. need experienced tech with what I think is the I-vtec economy model.
Submitted: 7 months ago.
Category: Honda
Expert:  justinsbg replied 7 months ago.
Hi,My name is ***** ***** I would be happy to help. I have been servicing only Honda/Acura for 9 years so I have some experience with this code. What does the idle drop down to when the check engine light comes on? Usually the check engine light doesn't come on until the pressure drops down around 4 or 5. The current oil pressure of 10 is not that bad at idle.