How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mastertech1 Your Own Question
Mastertech1
Mastertech1, ASE Master Technician
Category: Honda
Satisfied Customers: 2261
Experience:  30 years of all phases automotive diagnostics and repair
24034660
Type Your Honda Question Here...
Mastertech1 is online now
A new question is answered every 9 seconds

In park grinds go to reverse grinds neutral but drive dose

Customer Question

in park grinds go to reverse grinds neutral but drive dose not what could it be just had tranny re built
Submitted: 1 year ago.
Category: Honda
Expert:  Joe Barfield replied 1 year ago.

Hello , Does it grind cold & hot.....& if it Does still Grind...... is it like just for about a second or 2 just on engagement only? Thanks Joey

Customer: replied 1 year ago.
cold or hot all time
Expert:  Joe Barfield replied 1 year ago.

Ok , Just only when you select a gear...Then it stops ? or keeps grinding ?

Expert:  Mastertech1 replied 1 year ago.

Hello: The issue you are experencing, Is very common to a drive axle (1/2 shaft) that is not fully seated into the transmission, then it will cause a grinding noise, Take a good look at the axles where they go into the transmission,(what happens in many cases is on the end of the axles that go into the trans. there is a cir-clip that is worn or missing (this holds them into the transmission) Thanks, ***** ***** me know if I can be of any other assistance to you with this issue!

Related Honda Questions