How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MASTER TECH Your Own Question
MASTER TECH
MASTER TECH, Honda Service Technician
Category: Honda
Satisfied Customers: 5716
Experience:  28 years of Honda training and a master Honda tech
10834442
Type Your Honda Question Here...
MASTER TECH is online now
A new question is answered every 9 seconds

My car is a '06 4 cyl Honda accord with po2647. The rebuilt

Customer Question

My car is a '06 4 cyl Honda accord with po2647. The rebuilt engine installed in DEC 2014 and oil pressure switch was replaced in July 2015. check engine light has come on and off. It is currently on the car jerks upon acceleration and tries to cut off.
Was told timing chain needs replacing or sensor.
Submitted: 1 year ago.
Category: Honda
Expert:  MASTER TECH replied 1 year ago.

the oil pressure switch or the vtec pressure switch was replaced ?

Customer: replied 1 year ago.
The oil pressure switch was replaced.
Expert:  MASTER TECH replied 1 year ago.

ok thank you.

you have a failed vtec pressure switch and is super common failure.

see attached service bulletin

Expert:  MASTER TECH replied 1 year ago.

I would recommend you start with a new vtec pressure switch and retest as outlined in the service bulletin. this is such a common failure we see on a very regular basis at my dealer

Expert:  MASTER TECH replied 1 year ago.

if you brought your car into my dealer this is the same thing we will do thing as the service bulletin states as this is a well known issue