How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HondaPlatinum Your Own Question
HondaPlatinum
HondaPlatinum, A Technician
Category: Honda
Satisfied Customers: 11332
Experience:  13 year honda platinum level
3827149
Type Your Honda Question Here...
HondaPlatinum is online now
A new question is answered every 9 seconds

Civic ex: , I just had a water pump, timing belt replaced

Customer Question

Hi, I just had a water pump, timing belt replaced due to a bad water pump bearing, it was giving a cam sensor code, so they replaced that also, the car is still giving a p1361 code and the vin does not fall into the replace head range, any idras
Submitted: 1 year ago.
Category: Honda
Customer: replied 1 year ago.
Sometimes the car starts and runs fine. Sometimes it starts fine and drive then stalls out and shuts off, when it does that it's hard to start, and runs in some kind of safe mode. Won't go over 3,000 rpm or over 30mph.
Expert:  justinsbg replied 1 year ago.
Hi,My name is ***** ***** I would be happy to help. Can you please tell me what year Civic this is? It is not in the vehicle details you've provided. Thanks
Customer: replied 1 year ago.
2002 Honda civic ex coupe 1.7 l sohc vtec