Recent Feedback
Why does my ABS /Brake light come on after driving a few short miles. It will reset when the ignition key is turned off. I replaced the rear Spindles (hub Assy) and the front and rear brake pads.
Country: United StatesMake: HondaModel: CivicYear: 2006Engine: 4 cylinder Already Tried: Cleaned all four ABS Sensors at the wheels. Bleed all four brakes. replaced front and rear brake pads.
Where the wheel bearings replaced?Do you know the code for the ABS light?
The wheel bearings are part of the hub assy. I do not know the code.
Ok then the issue is a faulty Abs wheel speed sensor .You need to get the code stored and replace the faulty ABS wheel speed sensor for this issue.Once you replace the faulty wheel speed sensor it will fix this issue.
By getting the code stored will that determine which wheel speed sensor is bad.
Relist: Answer came too late.
Yes absolutely .The will tell you the exact wheel sensor thats bad.This is what needs to be done next to fix this issue.Hoped this helped.Positive feedback and bonuses greatly appreciated.
Experience: 13 year honda platinum level