Hello I will help you with your question,
I can provide the procedure to clear the light but if there is a problem with the system the light will come right back as the system runs a self test everytime you turn the ignition on.
If the light comes back you need to get the codes read out of the SRS computer, repair it and then reset the light.
Let me know how I can help you with this
You are supposed to use the special tool connector shown in the procedure but a single switch wired to speaker wires will work. It is the sequence and timing that is important to get the code clear signal to the computer but remember that the code will not clear and the light will not go out if there is really a problem with the system
Let me know how I can help
Glad to help and please let me know if you have further questions
Thank you for using JA!!