How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Honda Tech -
Category: Honda
Satisfied Customers: 17782
Experience:  18+yrs experience. State Inspector and Honda Diagnostics
Type Your Honda Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

How do i change the serpentine belt on a 2007 honda civic

Resolved Question:

how do i change the serpentine belt on a 2007 honda civic
Submitted: 6 years ago.
Category: Honda
Expert:  Ron Z. replied 6 years ago.


Is this the 1.8L or the 1.3L? Do you have A/C?


Customer: replied 6 years ago.
i have a 1.8 with AC
Expert:  Ron Z. replied 6 years ago.

To make this job easier, it is recommended that you use a special tool - Drive Belt Tensioner Tool. You can usually rent this tool from any "big chain" parts store.


  • Remove the wheel well splash guard from the passenger's side.
  • Set a long-handled, boxed-end wrench on the drive belt auto-tensioner from above the engine. Slowly turn the wrench in the direction shown, then remove the drive belt. NOTE: This is a hydraulic type auto-tensioner; you must turn the wrench slowly.
  • Install the new belt in the reverse order of removal.
Ron Z. and other Honda Specialists are ready to help you
Customer: replied 6 years ago.

can u send a better diagraham?

my belt seems to be 3 inches to long

Expert:  Ron Z. replied 6 years ago.


That is the only diagram I have. If you click "View Full Image" on the image above, you'll get a pop-up window with a close-up view (I set it to 8.5x11)


Related Honda Questions