How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted G. Your Own Question
Ted G.
Ted G., ASE Certified Technician
Category: Honda
Satisfied Customers: 6090
Experience:  20 years auto repair experience, ASE Master Tech, Expert Witness
7183013
Type Your Honda Question Here...
Ted G. is online now
A new question is answered every 9 seconds

how to replace a starter in a 1995 honda accord 4 cyl

This answer was rated:

how to replace a starter in a 1995 honda accord 4 cyl
Here ya go:

EMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disconnect both battery terminals, negative first.
  2. Disconnect the large cable from the starter motor; label and disconnect the wiring to the starter solenoid. Certain engine/transmission combinations have an engine harness secured in a clip on the starter or transaxle. Remove the harness from the clip and position it out of the way.



Click image to see an enlarged view

Fig. Fig. 1: Gear reduction starter used on some Honda models



Click image to see an enlarged view

Fig. Fig. 2: Direct-drive starter used on some Honda models

  1. Remove the starter motor by loosening the attaching bolts.

To install:
  1. To install, reverse the removal procedures. Tighten the starter-to-engine bolts to 47 ft. lbs. (64 Nm) on the Accord V-6 and 32 ft. lbs. (45 Nm) on other models.
  2. Connect the wiring to the starter securely.
  3. Connect the battery cables, positive cable first.

Let me know if you have any further questions. It is a nice easy repair.
Ted G. and other Honda Specialists are ready to help you