How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Honda Tech -
Category: Honda
Satisfied Customers: 18339
Experience:  18+yrs experience. State Inspector and Honda Diagnostics
18617752
Type Your Honda Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

what are the steps to replacing a 2000 honda crv radiator

Resolved Question:

what are the steps to replacing a 2000 honda crv radiator?
Submitted: 7 years ago.
Category: Honda
Expert:  Ron Z. replied 7 years ago.

REPLACEMENT

graphic

  1. Drain the engine coolant.
  2. Remove the upper and lower radiator hoses, and ATF cooler hoses.
  3. Disconnect the fan motor connector.
  4. Remove the radiator upper bracket, then pull up the radiator.
  5. Remove the fan shroud assemblies and other parts from the radiator.
  6. Install the radiator in the reverse order of removal. NOTE:
  • Set the upper and lower cushions securely.
  • Fill the radiator with engine coolant and bleed the air.
Ron Z. and 4 other Honda Specialists are ready to help you