How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve, Honda Mechanic
Category: Honda
Satisfied Customers: 3420
Experience:  13+ years with Honda,ase certified over 25 years
Type Your Honda Question Here...
Steve is online now
A new question is answered every 9 seconds

2000 honda: oil pressure sensor..crv. what socket do I need?

This answer was rated:

Needing to replace oil pressure sensor on 2000 honda crv. what socket do I need? 7/8 (6 point) too small, 1 inch too big. Help!!!
A 24mm socket is what I use to remove them with.
Steve and 4 other Honda Specialists are ready to help you