How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask 02hondafreak Your Own Question
02hondafreak, Honda/Acura Technician
Category: Honda
Satisfied Customers: 440
Experience:  3 1/2 years in Honda/Acura dealership-have done it all. 15+ years automotive work history.
Type Your Honda Question Here...
02hondafreak is online now
A new question is answered every 9 seconds

Remove and replace the left front fender on a 1997 Honda civic.

This answer was rated:

How do I remove and replace the left front fender on a 1997 Honda civic.

Welcome to Just Answer!





Use caution not to scratch the front grille.

  1. Remove the front grill mounting screws.
  2. Depress the front clips on each side with a flat tip screwdriver.
  3. Remove the grille from the vehicle.

To install:

  1. Installation is the reverse of removal.


  1. Disconnect the negative battery cable.
  2. Open the hood and support the hood with the prop rod.
  3. Remove the grille as outlined .
  4. Remove the two piece pin and clips from the inner fender liner, then remove the self-tapping screws and remove the inner fender liner.
  5. Detach the electrical connectors for the head lights, remove the headlight mounting bolts and the headlights.
  6. Protect the edges of the fender and door with masking tape as necessary.
  7. Matchmark the fender to the inner fender for reassembly. Trace the outline of the fender to inner fender with a sharpened No. 2 pencil.
  8. Open the front doors as necessary to access and remove the rear fender mounting bolts.
  9. Remove the fender mounting bolts at the front cowl, headlight opening and along the top of the fender in the engine compartment.
  10. Have an assistant help remove the fender from the vehicle.
  11. Installation is the reverse of the removal procedure.


Any other questions, please let me know. Thank you.




If this has helped, please press ACCEPT.

02hondafreak and 4 other Honda Specialists are ready to help you