How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall (Cheeko) Your Own Question
Randall    (Cheeko)
Randall (Cheeko), Auto mechanic
Category: Honda
Satisfied Customers: 2395
Experience:  Auto mechanic
Type Your Honda Question Here...
Randall (Cheeko) is online now
A new question is answered every 9 seconds

how to replace thermostat in a 93 civic

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Honda
Expert:  Randall (Cheeko) replied 8 years ago.
Hi, what size motor? thanks
Customer: replied 8 years ago.
DX model 16valve
Expert:  Randall (Cheeko) replied 8 years ago.

Hi, below are the steps, thanks



  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Disconnect the radiator hose from the thermostat housing outlet.
  4. Remove the thermostat housing outlet and remove the thermostat.
  5. Installation is the reverse of the removal procedure. Use new gaskets and O-rings. Install the thermostat with the pin towards the thermostat housing outlet. Tighten the thermostat housing outlet bolts for 1992-95 models to 7 ft. lbs. (10 Nm).
  6. Fill and bleed the cooling system.



Randall (Cheeko) and other Honda Specialists are ready to help you