How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask kibmech347 Your Own Question
kibmech347, ASE Certified Technician
Category: Honda
Satisfied Customers: 31
Experience:  25 years experience,honda,gm trained
Type Your Honda Question Here...
kibmech347 is online now
A new question is answered every 9 seconds

How to remove the panel digital clock on a Honda ...

This answer was rated:

How to remove the panel digital clock on a Honda CRV-2000 model?
hi, here are the instructions.

Center Air Vent Removal and Installation


  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
  • Put on gloves to protect your hands.

NOTE: Take care not to scratch the dashboard and related parts.

  1. Remove the center air vent, then disconnect the connector. NOTE: Carefully insert a flat-tip screwdriver under the clips, then pull out the center air vent while prying up the clips.
  2. Installation is the reverse of the removal procedure. NOTE: Make sure the connector is connected properly.graphicgraphicgraphichope this helps please hit accept and leave feed back.
kibmech347 and 2 other Honda Specialists are ready to help you

Related Honda Questions