How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask autodoc_2000 Your Own Question
autodoc_2000, Auto Technician
Category: Honda
Satisfied Customers: 2563
Experience:  ASE Master Tech W/Advanced Engine Performance
Type Your Honda Question Here...
autodoc_2000 is online now
A new question is answered every 9 seconds

2002 Honda Odyssey Where is the the

Customer Question

2002 Honda Odyssey
Where is the the transmission drain plug and fill plug?
Submitted: 10 years ago.
Category: Honda
Expert:  autodoc_2000 replied 10 years ago.

ATF Replacement

NOTE: Keep all foreign particles out of the transmission.

  1. Bring the transmission up to operating temperature (the radiator fan comes on) by driving the vehicle.
  2. Park the vehicle on the level ground, and turn the engine off.
  3. Remove the ATF filler bolt and the drain plug (A), and drain the Automatic Transmission Fluid (ATF) . NOTE: If a cooler flusher is used, refer to ATF Cooler Flushing
  4. Reinstall the drain plug with a new sealing washer (B).
  5. Refill the transmission with the recommended fluid into the filler hole (A) to the upper mark on the dipstick. Always use Honda ATF-Z1 Automatic Transmission Fluid (ATF) . Using a non-Honda ATF can affect shift quality. Automatic Transmission Fluid Capacity: 3.3L (3.5 US qt. 2.9 Imp qt) at changing 7.9L 18.3 US qt. 7.0 Imp qt) at overhaul
  6. Install the ATF filler bolt (B) with a new sealing washer (C).