How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rusty Your Own Question
Rusty
Rusty, Engineer
Category: Home Theater-Stereo
Satisfied Customers: 5531
Experience:  Let my expertise help solve your technical problems. Over 20 years electronics and sound equipment experience.
63817454
Type Your Home Theater-Stereo Question Here...
Rusty is online now
A new question is answered every 9 seconds

I am installing an eBay Russound CAA66. sorry, did not

Customer Question

I am installing an eBay Russound CAA66.
JA: What's the make/model of your device? How old is it?
Customer: sorry, did not finish ... am installing a Russound Caa66 with KP6 keypads in four rooms ... I have successfully installed music in one room, but after repeating the process in the second room. Have mimicked the process for a
JA: How long has this been going on? What troubleshooting have you tried?
Customer: i have redone the entire process several times.
JA: Anything else you want the electronics expert to know before I connect you?
Customer: My goal is to get four source points ... in four separate rooms
Submitted: 11 days ago.
Category: Home Theater-Stereo
Expert:  Rusty replied 8 days ago.

Hello, my name is***** to Justanswer! Give me just a few minutes to look up some specifics, I'm working on this now.

Expert:  Rusty replied 8 days ago.

Do you still need help with this?

Customer: replied 7 days ago.
Rusty, I have a Russound Caa66 unit and have successfully completed an installation in one zone (family room). However, I repeated the process on the next zone (MBR) but cannot get any sound. Is there some trick that I might be missing?
Expert:  Rusty replied 7 days ago.

Let's take a look. That is a tall order to install a multi zone system, not everyone can get as far as you have.

Each zone you can select a source, then turn up the volume.

If that's not working, it seems like the source setup hasn't been done yet. This is in your installation manual on page 34, and if you follow the flow chart on page 40, you should be able not to miss any steps. Click here for your installation manual.