How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie, Technician
Category: Home Theater-Stereo
Satisfied Customers: 12134
Experience:  Have been in the business 25+ yrs., down to component level.
Type Your Home Theater-Stereo Question Here...
Louie is online now
A new question is answered every 9 seconds

I have a TX-sr602 with no power is their anything I can do,

Customer Question

i have a TX-sr602 with no power is their anything I can do
JA: How long has this been going on?
Customer: plugged it in after several days with no power. just wont start0up
JA: What troubleshooting have you tried?
Customer: checked power board all ok. pulled top off & checked fuses all ok.
JA: The theater expert can solve this for you. Anything else you want him to know before I connect you two?
Customer: no just need amp to go
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Home Theater Technician about your situation and then connect you two.
Submitted: 12 months ago.
Category: Home Theater-Stereo
Customer: replied 12 months ago.
Hi haven't heard anything as yet.
Expert:  Louie replied 12 months ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, the description of " power..." would imply completely/electrically dead. If yes, proposed preliminary checks (if have not been done) on:

  • • failed pain power switch and/or main voltage selector switch depending on the version (least likely);
  • • failed current limiting resistor R921 (likely);
  • • open primary winding of standby transformer T902 (most likely).

Related Home Theater-Stereo Questions