How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ITPeter Your Own Question
ITPeter
ITPeter, Engineer
Category: Home Theater-Stereo
Satisfied Customers: 15758
Experience:  Electronic Engineer
30970729
Type Your Home Theater-Stereo Question Here...
ITPeter is online now
A new question is answered every 9 seconds

I have a jvc DLA-RS6710 WITH 3D AND 4K I HAVE A ROKU 4

Customer Question

I have a jvc DLA-RS6710 WITH 3D AND 4K I HAVE A ROKU 4 CABLABLE PUUTING OUT 4K I HAVE A 4K HDMI CABLE FROM ROKU DIRECTLY TO REAR OF JVC TRIED BOTH HDMI 1 AND 2 BOTH SAY INPUT DOES NOT EXCEPT THE ROKU DO I NEED SO KIND OF COPY WRIGHT PROTECTION PEASE IN BETWEEN I WOULD LOVE TO SEE 4K ON THIS PROJECTOR ONE DAY RICH
Submitted: 11 months ago.
Category: Home Theater-Stereo
Expert:  ITPeter replied 11 months ago.

Hi there,

Try updating the firmware on the projector to the latest available:

http://pro.jvc.com/prof/attributes/software_dow.jsp?model_id=MDL102255&feature_id=17

Reply back and let me know if that helps...

Pete.

Customer: replied 11 months ago.
tried that im going to call jvc on monday i think i need a receiver that support hdcp 2.2
Expert:  ITPeter replied 11 months ago.

Ok, if the firmware update did not help then there isn't anything else you can try as a user to make it work.

Sorry to be the bearer of bad news on this occasion,

Pete.