How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Nathan Your Own Question
Nathan
Nathan, Engineer
Category: Home Theater-Stereo
Satisfied Customers: 20318
Experience:  Custom home theater installer. Authorized dealer top brands
59725966
Type Your Home Theater-Stereo Question Here...
Nathan is online now
A new question is answered every 9 seconds

Their is a blinking light on the left hand side of the

Customer Question

Their is a blinking light on the left hand side of the Receiver, and I am unable
to to do anything even if I turn OFF the power, it will not go off. Is their a
reset button on this receiver? Or is their some wrong ? The receiver is about
5/yrs old give or take a year. Sorry I have to ask these question I miss place
the book that came with it. Everything is plug into the receiver
Submitted: 1 year ago.
Category: Home Theater-Stereo
Expert:  Nathan replied 1 year ago.

Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority.

Sorry to hear you’re having trouble.

Expert:  Nathan replied 1 year ago.

The manual would not help with this situation, and there is not a reset button that would help either.

The shut down is a protection circuit kicking in to protect the receiver from damage.

This could be caused by a short in one of the speakers or components, thermal fault, or an internal defect in the amp itself.

You can try a few fixes yourself. To begin, power the receiver off, and disconnect all speakers and components. Try to turn it back on in Tuner (am/fm) mode and see if it will stay on. If it does, power off and reconnect 1 speaker, then power on to test again. Continue this process until you isolate the speaker or component causing the problem, or until everything operates normally.

Let me know the results, and I'll advise further if needed.

Nathan