Home Theater Questions? Ask a Technician for Answers ASAP
Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority.
Sorry to hear you’re having trouble.
This type of problem is often caused by a contaminated laser lens. You can attempt to clean it by blowing out the disc tray/slot area with a can of compressed air for dusting computers (keep the can upright only so you don't get chemical propellant on the lens).
If this doesn't help, you can try a specialty cleaning disc (Allsop 23321 Ultra Pro Carbon-Edge DVD and CD-Drive Cleaner) which has little brushes that clean the lens more thoroughly.
If neither of these cleaning steps help, then this is more likely a hardware fault, which could include a bad laser emitter or pickup, faulty spindle motor or laser transport, bad d/a converter, etc. Any of these issues would require repair/replacement.
If it gets to that point, I can advise you on service options.