Hi, surrounds came with good directions. Got them installed now. Once dry I can glue dust caps on tomorrow. My problem now is that the last owner got candle wax all down both sides of the grills on one speaker. The lower part has removable grill. But tHe tweeter array does not seem intended to be removed. I read online the tops are removed with two latches. This turns out to only remove the wood top of the cabinet to access cross over and tweeter array. I've tried picking wax off by hand. But it is deep into the fabric. I submitted question to this site asking about wax removal. Hair dryer or iron was only suggestions. Both of which would require I remove fabric from in front of tweeters. Which appears requires removing all 12 tweeters, brackets etc.. I need to ask if you can guide me through taking the tweeters and brackets off. Screws seem to go all directions. If you can access any removal instructions, please let me know. Thanks, Darius.
Already Tried: Picking it off by hand. Using a brush. Wax seems to deep into fabric.
Hi again Darius and welcome back to JustAnswer,Thank you for the new question, all the previous accepts and your patience. Should you still need assistance for information purposes only... Initially, please try and seek further information from the manufacturer of the product shown HERE. (NNN) NNN-NNNNbr/>Offhand, please view images below:
Experience: Have been in the business +25 yrs down to component level.