How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Engineer
Category: Home Security Systems
Satisfied Customers: 11504
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
23511658
Type Your Home Security Systems Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

We purchased a home that was an estate sale. the owner had

Customer Question

We purchased a home that was an estate sale. the owner had died. we have no clue as to what the security code is
JA: What's the make/model of your device? How old is it?
Customer: ademco system-model 4110dl-installed 6/28/1994
JA: How long has this been going on? What troubleshooting have you tried?
Customer: we closed on the house 12/22/2016. I opened the panel looking for a on/off switch. that's about it. I read the manual and that's how I found out about the security code.
JA: Anything else you want the security expert to know before I connect you?
Customer: no.....does this cost anything?
Submitted: 3 months ago.
Category: Home Security Systems
Expert:  Michael Hannigan replied 3 months ago.

Happy Holidays! Hello. My name is Michael. I can help you with your question.

Expert:  Michael Hannigan replied 3 months ago.

The programming procedure for this model is on page 9 of the manual, which is at this link:

http://bitli.es/nAeh5Y

You will have to power up the system while pressing those two buttons. This is the only way to reset the system. There is a possibility that the system is setup to no be allowed to reset. If this is the case, then the only way to program the system without the master code is to replace the panel.

--------------------
Happy Holidays!
Your satisfaction is my priority.
Please take a moment to rate my service 5 stars and press submit at the top of your question page so I am compensated for my time.
You can reply back at any time, even after rating, if you need additional assistance.

Mike
--------------------

Related Home Security Systems Questions