How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask To-Shay Your Own Question
To-Shay, Electronic Security Engineering
Category: Home Security Systems
Satisfied Customers: 34
Experience:  Long & Extensive experience in the Electronic Security Industry from Design, through to Installation & Ma
Type Your Home Security Systems Question Here...
To-Shay is online now
A new question is answered every 9 seconds

I have moved into a new house with no code Whilst stripping

Customer Question

I have moved into a new house with no code Whilst stripping wall paper the tamper has started constantly beeping
JA: What's the exact make and model of your printer, and can you guesstimate how old it is?
Customer: The alarm is a c&K securitech I think a 800L
JA: How long has this been going on? What troubleshooting have you tried?
Customer: About 10 mins I've removed the cover and tried replacing it
JA: Anything else you want the security expert to know before I connect you?
Customer: No
Submitted: 21 days ago.
Category: Home Security Systems
Expert:  Russell H. replied 21 days ago.

Hi, thank you for contacting My name is Russell. I will do my best to provide the right answer to your question.

You will need a code for the security system, to disable the alarm beep, or to reset the tamper alarm status. Do you have such a code?

Customer: replied 21 days ago.
Hi no I moved to the property and the alarm was in with no code given
Customer: replied 21 days ago.
If possible I would just disable it for the night
Expert:  Russell H. replied 21 days ago.

Will you want to simply disable the alarm system altogether?

Or would you like to try entering default codes?: try these if so







any one of those might work.

Customer: replied 21 days ago.
Is there a risk the alarm will go off with guess codes?
Expert:  Russell H. replied 21 days ago.

No, no risk, really. It will just say, 'invalid' or something, but won't sound an alarm.

Customer: replied 21 days ago.
Doesn't seem to be any default number
Expert:  Russell H. replied 21 days ago.



which is the default engineer code.

If it accept that, let me know and stop there.

Customer: replied 21 days ago.
Nope not that either
Expert:  Russell H. replied 21 days ago.

Then you may have to disable the alarm system by rough measures, with a wire clippers, or similar means.

Have you located the main alarm system box, as opposed to the keypad (which is not always the same unit by any means.) If so, do you have a key to open it with?

Related Home Security Systems Questions