How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Engineer
Category: Home Security Systems
Satisfied Customers: 11416
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
23511658
Type Your Home Security Systems Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

Am homeowner/installed vista 20P/NC/hardwired/unsupervised.

Customer Question

am homeowner/installed vista 20P/NC/hardwired/unsupervised. used 6160 keypad for manual install. system up & running EXCEPT:
problem w/fields 34 and 35 for entry 1 door (set as zone type 1). cannot edit/change fields to set exit/entry delay time-want 10 seconds.
also same issue w/field 38 to enable confirmation beep after arming.
there is no keypad for the entry-received a 6150 but was defective and was returned. waiting for replacement. when alarm is armed AWAY or MAX, get 1 second audible alarm, then system sets up.
Submitted: 11 months ago.
Category: Home Security Systems
Expert:  Michael Hannigan replied 11 months ago.

Hello. Thank you for coming to JustAnswer.

Sorry for the wait. My name is Michael. I will be helping you with your question today.

Expert:  Michael Hannigan replied 11 months ago.

You must have a 2 line alpha display keypad to set those options. You mention that there is no keypad for entry - you will need that before your proceed. Does that answer your question?

Mike

Expert:  Michael Hannigan replied 11 months ago.

There is an additional step. Once the app is installed, you must connect using wifi direct. To do that, go into the wireless settings on your iPhone and connect to the network named direct-cube.... And use the password ***** Then you will be able to use the app to print to it. Afterwards, remember to reconnect to your regular wifi network.

Mike

Related Home Security Systems Questions