How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask To-Shay Your Own Question
To-Shay, Electronic Security Engineering
Category: Home Security Systems
Satisfied Customers: 34
Experience:  Long & Extensive experience in the Electronic Security Industry from Design, through to Installation & Ma
Type Your Home Security Systems Question Here...
To-Shay is online now
A new question is answered every 9 seconds

Alarm is armed, but no alarm m replaced keypad nx-1300E.

Customer Question

alarm is armed , but no alarm m replaced keypad nx-1300E. Tested *4 for sound. what has to be done?
Submitted: 1 year ago.
Category: Home Security Systems
Expert:  Eric Billings replied 1 year ago.

Have you tried a real life test instead of the *4 command? (really arm it and let the exit time expire and then open a window or door that does not have an entry delay) It sounds like you might have but I can't be sure.

2 other questions are why did you need to replace the keypad and what is the model of the control panel?

Expert:  Eric Billings replied 1 year ago.

If you have access to the inside of your control the model number would be listed on the inside of the door on the diagram sticker.

Related Home Security Systems Questions