How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Home Security Systems
Satisfied Customers: 15736
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Home Security Systems Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a gemini alam system. i just moved in and have not activated

Customer Question

i have a gemini alam system. i just moved in and have not activated the system yet. but the system is beeping. how do i make it stop?
Submitted: 1 year ago.
Category: Home Security Systems
Expert:  Pete replied 1 year ago.
Hi there,
To start with, you could try pressing the 'C' or 'Cancel' button if your system has one.
It really depends on which alarm system model you have, and if there are any error codes being displayed, etc.
Perhaps the internal backup battery is running low.
If you can provide the model number and any error code, etc. I can assist you further.

Related Home Security Systems Questions