Recent Feedback
We are looking for someone to check our system and maybe teach us about our system. We are not the original owners. We have a PC1500 and the alarm keeps going off. We had to shut off at the circuit braker. Zone 3 and 4 lights come on and the alarm goes off when circuit braker is turned on.
Already Tried: attempted to reset per manual instructions. It does not reset.
HiWhat city are you in? Did you try resetting by powering down, linking a wire between Zone 1 and PGM1 and then repowering?? If so did this not work at defaulting the panel?It sounds like you may need a technician and I can source a DSC agent near you but if the panel is locked (which it sounds like it might be) then it could require the control board to be sent back to DSC for unlocking and it might be cheaper just to buy and unlocked board on Ebay...
Sounds like we would need a technician anyway to replace the board? We wouldn't know how to do this. Can you recommend someone?
What city are you in?
Discovery Bay, CA. Near Brentwood & Antioch
In San Francisco:http://www.detectall.com/Or Fremont:Martin's Security Depot45563 Industrial PlaceFremont, CA94538United States Phone:(NNN) NNN-NNNN (NNN) NNN-NNNNFax:(NNN) NNN-NNNN
Experience: 20 years experience in the Alarm Industry