Hi Glenn,I just recieved the 6148 Ademco keypad. 1) As I understand the setup instructions, I'll rmove the four color coded wires from the old pad and put'em on the new control panel with a very small screw driver . Do I need to do any thing else e.g. change any code ot keypad address? Do I need a special screw driver?2) I used to press #2 to arm when away and #3 to stay. The instructions say "Press code + 2 when away. #8 key says "code". Does this mean now I'll press 8+2 for away?Will appreciate response before I instal the new key pad.Thanks.Kewal
Hi, I am a Moderator for this topic. I sent your requested Professional a message to follow up with you here, when they are back online. If I can help further, please let me know. Thank you for your continued patience.
what additional info. is needed? I am looking for step-by-step instructions on "how to instal and get the key pad working for arming, disarming etc. Do I need code or address, as requested above.ThanksKewal
No Additional information is needed at this time Sometimes, finding the right Professional can take a little longer than expected and we thank you greatly for your understanding. We’ll be in touch again shortly