How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john Your Own Question
john
john, master tech
Category: Home Improvement
Satisfied Customers: 15883
Experience:  20 plus years
6149662
Type Your Home Improvement Question Here...
john is online now
A new question is answered every 9 seconds

I would like an indication of a low-cost machine I can find

Customer Question

Hello,
I would like an indication of a low-cost machine I can find at Home Depot or Lowes in Manhattan that is capable of cutting a piece of iron that is about 2 inches wide (I want to split a metal bar in 5 pieces) .
Thank you
Submitted: 9 days ago.
Category: Home Improvement
Expert:  john replied 9 days ago.

do you have a pic of the iron?

Customer: replied 8 days ago.
No. But it is a very thin 2 inch bar
Expert:  john replied 8 days ago.

thats is going tobe difficult, do you have a machine shop near you with a power band saw?

Customer: replied 7 days ago.
You are asking me the same question that i asked ioriginally lol
Customer: replied 7 days ago.
I live in Manhattan
Expert:  john replied 7 days ago.

your not gonna buy a low cost machine to do this

http://www.homedepot.com/p/WEN-4-6-Amp-4-in-x-6-in-Metal-Cutting-Band-Saw-with-Stand-3970/206926979?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25T-PowerTools%7c&gclid=Cj0KEQjwyZjKBRDu--WG9ayT_ZEBEiQApZBFuOoyqYoaWF8LwD4tOgnJiLpa9Zc3dlmcUE6yj2REH-EaAmMr8P8HAQ&gclsrc=aw.ds

Customer: replied 7 days ago.
Thanks. But may I please have a suggestion of an item sold in store? This item is just flaold online
Expert:  john replied 7 days ago.

there is no easy way to cut bar stock..i would source out a machine shop to this

lots of machine shops in queens, brroklyn and long island city..

Customer: replied 7 days ago.
But are you suggesting these shops to buy a machine or just to cut the metal bar?
And please, give me suggestions of shops in Queens .Thanks
Expert:  john replied 7 days ago.

a shop just to cut the bar

DIRECTIONS Gotham Machine5.0 (2) · Machine Shop Long Island City, NY(646)(###) ###-####/a>Opens at 9:00 AM
Customer: replied 7 days ago.
I live in Manhattan as I told you before. Can you suggest a place near me?
And can you suggest a machine to cut the bar that I can buy in store (not just online)?Thanks

Related Home Improvement Questions